Table 38 Typical Measurement Ranges And Default Setups For A Single Element Transducer - Olympus 38DL PLUS User Manual

Table 37 Datalogger specifications (continued)
Parameter
File formats
External memory card
Table 38 Typical measurement ranges and default setups for a single element
Setup name
DEFM1-20.0-M116
DEFM1-10.0-M112
DEFM1-10.0-M1016
DEFM1-5.0-M110
DEFM1-5.0-M109
DEFM1-2.25-M106
DEFM1-2.25-M1036
DEFM3-20.0-M208
DEFP2-20.0-M208
DEFM3-10.0-M202
DEFM2-10.0-M202
DEFP2-10.0-M202
DEFM3-15.0-V260
DEFM2-15.0-V260
DEFP2-15.0-V260
DEFM2-5.0-M201
DEFP2-5.0-M201
DEFM2-5.0-M206
DEFP2-5.0-M206
Incremental
Sequential (defined by starting and ending ID number)
Sequential with custom points
2-D grid
2-D grid with custom points
3-D grid
3-D custom
Boiler
microSD memory card
2 GB maximum capacity
transducer
Transducer
M116 Steel: 0.250 mm to 8.000 mm (0.020 in. to 1.500 in.)
M112 Steel: 0.760 mm to 250.000 mm (0.030 in. to 10.000 in.)
M1016 Steel: 0.760 mm to 250.00 mm (0.030 in. to 10.000 in.)
M110 Steel: 1.00 mm to 380.00 mm (0.040 in. to 15.000 in.)
M109 Steel: 1.00 mm to 500.00 mm (0.050 in. to 20.000 in.)
M106 Steel: 2.00 mm to 635.00 mm (0.080 in. to 25.000 in.)
M1036 Steel: 2.00 mm to 635.00 mm (0.080 in. to 25.000 in.)
M208 Steel: 0.25 mm to 5.00 mm (0.008 in. to 0.200 in.)
M208 Plastic: 0.12 mm to 5 mm (0.005 in. to 0.200 in.)
M202 Steel: 0.25 mm to 12.00 mm (0.010 in. to 0.500 in.)
M202 Steel: 0.75 mm to 12.00 mm (0.030 in. to 0.500 in.)
M202 Plastic: 0.6 mm to 6 mm (0.025 in. to 0.25 in.)
V260 Steel: 0.25 mm to 5.00 mm (0.010 in. to 0.200 in.)
V260 Steel: 0.75 mm to 12.50 mm (0.030 in. to 0.500 in.)
V260 Plastic: 0.25 mm to 3 mm (0.010 in. to 0.120 in.)
M201 Steel: 1.50 mm to 25.40 mm (0.050 in. to 1.000 in.)
M201 Plastic: 0.62 mm to 12.5 mm (0.025 in. to 0.500 in.)
M206 Steel: 1.25 mm to 19.00 mm (0.050 in. to 0.750 in.)
M206 Plastic: 1 mm to 12.5 mm (0.040 in. to 0.500 in.)
DMTA-10004-01EN, Rev. D, November 2016
Value
a
Typical measurement range
Technical Specifications 279