Figure 10-19 Displaying Temperature Compensation Data - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Figure 10‑19 Displaying temperature compensation data
5. While the temperature compensation function is active, if the temperature of the
test piece changes, you can quickly change the CURRENT TEMP as follows:
a) Press [2nd F], [XDCR RECALL] (REF VALUE).
b) In the CURRENT TEMPERATURE screen, enter the new current
temperature value.
NOTE
Both the thickness and current temperature values are saved to the internal
datalogger.
158 Chapter 10