Figure 1-4 The Top End Connectors - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
To avoid the risk of injuries or equipment damage, use only the AC power cord
supplied with the 38DL PLUS. Do not use this AC power cord with other products.
The DC power, USB/RS-232 communication, and Transmit/Receive probe connectors
are located on the top end of the 38DL PLUS (see Figure 1-4 on page 24).
USB/RS-232 serial
communication connector
DC power connector
The USB client connector, the VGA output connector, and the external microSD
memory card slot are located on the right side of the instrument, hidden behind the
I/O door (see Figure 1-5 on page 25).
24 Chapter 1
CAUTION
Figure 1‑4 The top end connectors
Transmit/Receive
transducer connector 2
Transmit/Receive
transducer connector 1