Using Battery Power; Figure 2-3 Connecting The Dc Power Plug - Olympus 38DL PLUS User Manual

Ultrasonic thickness gage
Hide thumbs Also See for 38DL PLUS:
Table of Contents

Advertisement

3.
Connect the DC power plug from the charger/adaptor to the DC adaptor
connector (see Figure 2-3 on page 33).
4.
Press [ON/OFF] to turn on the 38DL PLUS.
2.3

Using Battery Power

The 38DL PLUS comes with a rechargeable lithium-ion (Li-ion) battery (P/N: 38-BAT
[U8760054]). The 38DL PLUS automatically recharges the 38-BAT battery when you
connect the instrument to the AC power.
You can also operate the 38DL PLUS using four AA-size Alkaline or nickel metal
hydride (NiMH) rechargeable batteries using the AA battery holder (P/N: 38DLP/AA
[U8780290]). The 38DL PLUS does not recharge NiMH batteries. You must recharge
AA batteries with an external battery charger (not included).
NOTE
The 38DL PLUS battery is not fully charged when shipped. You must fully charge the
battery before operating the instrument from the battery power.
Connector rubber seal
Figure 2‑3 Connecting the DC power plug
DMTA-10004-01EN, Rev. D, November 2016
DC power plug
DC adaptor connector
Powering the 38DL PLUS
33

Advertisement

Table of Contents
loading

Table of Contents