Rectification indicator
Echo detection marker
Delay value
Minimum/Maximum
Echo detection mode
and update rate
Figure 3‑3 Example of other elements appearing on the measurement screen
The loss-of-signal (LOS) appears and the thickness value is cleared when the
38DL PLUS no longer detects ultrasonic echoes (see Figure 3-4 on page 41).
No thickness value
3.2
Menus and Submenus
The 38DL PLUS displays menus and submenus when you press some of the front
panel keys. The menu appears at the top-left corner of the screen (see Figure 3-5 on
page 42). If applicable, a submenu also appears, conveniently showing the parameters
available for the highlighted menu command.
Figure 3‑4 The loss‑of‑signal (LOS) indicator
DMTA-10004-01EN, Rev. D, November 2016
Loss-of-signal (LOS) indicator
Software User Interface Elements
Zoom indicator
[WAVE ADJ]
parameter value
Range value
Freeze indicator
Alarm indicator
Gain
Help text bar
41