Deleting A Range Of Ids; Deleting All Data Files; Figure 11-21 Deleting The Data Of An Id Range In The Active File - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
11.3.5

Deleting a Range of IDs

You can delete a range of IDs in the active file using the clear memory function. This
function deletes both the data and the ID number locations for incremental and
manual (built in GageView) data files. For other data file types only the data is
deleted, not the ID number locations.
To delete a range of IDs in a file
1. Open the file from which you wish to delete the data of a range of IDs (see
"Opening a File" on page 184).
2. Press [2nd F], [FILE] (CLR MEM).
3. In the CLEAR ID RANGE, screen (see Figure 11-21 on page 190):
a) Edit the STARTING ID and the ENDING ID values to define the range of
IDs that you wish to delete from the file.
b) Select CLEAR.
Figure 11‑21 Deleting the data of an ID range in the active file
11.3.6

Deleting All Data Files

You can use the reset function to quickly erase all the files stored in the 38DL PLUS.
190 Chapter 11