Figure 11-20 Deleting A File - Olympus 38DL PLUS User Manual

To delete a file stored in the 38DL PLUS
1. From the measurement screen, press [FILE].
2. In the menu, select DELETE.
3. In the DELETE screen (see Figure 11-20 on page 189):
a) In the list, select one or more files to delete.
A check mark appears on the right on the line of files that you selected.
b) Press [2nd F], [] to leave the list.
c) Select the desired Delete Stored Data or Entire File option.
d) Set DELETE MODE to DATA to only delete the contents of the file.
OR
Set DELETE MODE to FILE to completely erase the file from the memory.
e) Select DELETE to perform the operation.
NOTE
When you select to delete multiple files, and some files are delete-protected, the
38DL PLUS will only delete the files that are not delete-protected.
Figure 11‑20 Deleting a file
DMTA-10004-01EN, Rev. D, November 2016
Using the Datalogger 189