9. Configuring the Instrument
This chapter describes how to configure various instrument parameters.
9.1
Configuring Measurement Parameters
The MEAS setup is the most commonly used setup menu screen where you access
global parameters concerning the instrument measurement features.
To configure measurement parameters
1.
From the measurement screen, press [SETUP MENU].
2.
In the menu, select MEAS.
The MEAS screen appears. The last parameters differ depending if a single or
dual element transducer is connected (see Figure 9-1 on page 127).
For a single element transducer
Figure 9‑1 The MEAS screen
DMTA-10004-01EN, Rev. D, November 2016
For a dual element transducer
Configuring the Instrument
127