DMTA-10004-01EN, Rev. D, November 2016
COMM PROTOCOL
OUTPUT FORMAT:
DATABASE TRACKING
B‑SCAN OUTPUT
37DL PLUS OUTPUT
CONNECTION TYPE
MASTER RESET
Performs the measurement reset and the internal memory reset in one step.
The master reset permanently deletes all stored thickness readings/waveforms that
are stored in the internal memory card of the 38DL PLUS.
To activate a reset function
1.
Press [2nd F], [SETUP MENU] (SP MENU).
2.
In the menu, select RESETS.
3.
In the RESETS screen (see Figure 15-1 on page 267):
a) In the RESETS list, highlight the desired reset function.
A warning message appears, indicating the type of data that will be reset.
b) Select RESET.
266
Chapter 15
Table 28 Default communication settings
Parameter
CAUTION
Default value
Multi Character
F1
Off
Off
Off
USB