Advertisement
Quick Links
45MG
Getting Started Guide
Intended Use
The 45MG is designed to measure thicknesses of industrial and commercial materials. Do not use the
45MG for any purpose other than its intended use.
Instruction Manual
Before use, thoroughly review the 45MG User's Manual (P/N: DMTA-10022-01EN), and use the
product as instructed. The User's Manual contains essential information on how to use this Olympus
product safely and effectively. The 45MG User's Manual is available on the documentation CD (P/N:
45MG-MAN-CD [U8147024]) that is shipped with the 45MG, or can be downloaded at
www.olympus-ims.com. Keep the documentation CD in a safe, accessible location.
Safety Signal Words
Indicates an imminently hazardous situation calling attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in death or serious personal injury.
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in death or serious personal injury.
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in minor or moderate personal injury, material
damage, particularly to the product, destruction of part or all of the product, or loss of data.
45MG — Getting Started Guide
1
Advertisement
Related Manuals for Olympus 45MG
Summary of Contents for Olympus 45MG
- Page 1 45MG Getting Started Guide Intended Use The 45MG is designed to measure thicknesses of industrial and commercial materials. Do not use the 45MG for any purpose other than its intended use. Instruction Manual Before use, thoroughly review the 45MG User’s Manual (P/N: DMTA-10022-01EN), and use the product as instructed.
- Page 2 1 connector To avoid the risk of electric shock, do not touch the inner conductors of the T/R 1 and T/R 2 connectors. Up to 200 V may be present on the inner conductor. 45MG —Getting Started Guide...
-
Page 3: To Replace The Batteries
Do not disassemble, heat above 50 °C, or incinerate the batteries. To replace the batteries Ensure that the power to the 45MG is turned off. Disconnect any other cables connected to the 45MG. - Page 4 Wipe the couplant off the transducer tip, and then press [2nd F], [CAL ZERO] (Do ZERO). The 45MG is now ready to take thickness readings using the default velocity for the test block supplied with the instrument.
-
Page 5: Keypad Functions
Gage — User’s Manual (P/N: DMTA-10022-01EN), or contact Olympus. Keypad Functions The 45MG comes with either an English or international keypad. The functions on both keypads are identical. Many keys on the international keypad contain pictograms instead of text labels. In the 45MG user documentation, keypad keys are referred to using the English label, displayed in bold and within brackets (ex.: [FILE]). - Page 6 Power indicator [WAVE ADJ] parameter (battery, USB, or AC) Thickness value Rectification indicator Units Echo detection marker Range value Delay value Zoom indicator Mode (MIN/MAX) Freeze indicator and value Gain level Mode and update rate Alarm indicator 45MG —Getting Started Guide...
-
Page 7: Instrument Hardware Components
Instrument Hardware Components I/O door protecting USB Color display connector Transducer connectors Protective rubber boot (optional) Strap rings (at the four corners of optional rubber boot) Keypad Stand Power key (optional) 45MG — Getting Started Guide... - Page 8 Olympus NDT, 48 Woerd Avenue, Waltham, MA 02453, USA www.olympus-ims.com Printed in the United Stated of America • © 2012 by Olympus. All rights reserved. All brands are trademarks or registered trademarks of their respective owners and third party entities.