Changing Display Settings; Figure 4-2 Selecting Clock Parameters - Olympus 38DL PLUS User Manual

To set the clock
1. Press [2nd F], [SETUP MENU] (SP MENU).
2. In the menu, select CLOCK.
3. In the CLOCK screen (see Figure 4-2 on page 51):
a) Set parameters to the current date and time and to the desired date and hour
modes.
b) Select SET.
4.4

Changing Display Settings

You can change the appearance of some display elements such as colors, brightness,
waveform rectification, and waveform trace.
To change the display setting
1. From the measurement screen, press [DISPLAY].
2. In the DISPLAY SETTINGS screen (see Figure 4-3 on page 52), select the desired
parameter and value for the following parameters:
— COLOR SCHEME to either select the INDOOR or OUTDOOR optimized
visibility (see "Color Schemes" on page 52 for details).
Figure 4‑2 Selecting clock parameters
DMTA-10004-01EN, Rev. D, November 2016
Initial Setup 51