Figure 2-5 Selecting The New Battery Type - Olympus 38DL PLUS User Manual

6. At the back of the instrument, unscrew the four screws of the battery
compartment cover (see Figure 2-4 on page 36).
7. Remove the battery compartment cover.
8. Remove the battery and carefully disconnect the battery connector.
9. Connect the new battery in the battery compartment.
10. Ensure that the gasket of the battery compartment cover is clean and in good
condition.
11. Reinstall the battery compartment cover at the back of the instrument, and then
tighten the four screws.
12. Reinstall the protective rubber boot and the hand strap.
13. Press [ON/OFF] to turn on the 38DL PLUS.
14. To answer the question appearing at the bottom of the screen (see Figure 2-5 on
page 37):
 Select Li‑ion when using a 38-BAT battery.
OR
Select NiMH or Alkaline when using four NiMH AA batteries or four
Alkaline AA batteries with the AA battery holder.
NOTE
When replacing the rechargeable 38-BAT battery, fully charge the battery to ensure
the accuracy of the estimated remaining battery charge shown by the power indicator
(see "Power Indicator" on page 31).
Figure 2‑5 Selecting the new battery type
DMTA-10004-01EN, Rev. D, November 2016
Powering the 38DL PLUS 37