Adjusting The Measurement Update Rate; Figure 4-10 Comparing Normal And Zoomed Display In Mode 3; Figure 4-11 The Measurement Update Rate Indicator - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Normal display
Figure 4‑10 Comparing normal and zoomed display in mode 3
4.6

Adjusting the Measurement Update Rate

You can select a predefined measurement update rate (4 Hz, 8 Hz, 16 Hz, 20 Hz, or
MAX). The measurement update rate indicator is always present on the left of the
thickness measurement (see Figure 4-11 on page 60).
Measurement update
rate indicator
The MAX update rate is up to 30 Hz and is dependent on measurement type. This
option is useful when making high temperature thickness measurements to help limit
the transducer contact time or for applications where you scan the transducer over an
area to find the minimum thickness.
60 Chapter 4
Figure 4‑11 The measurement update rate indicator
Zoomed display