Table of Contents
Advertisement
TIP
The TIP signal word calls attention to a type of note that helps you apply the
techniques and procedures described in the manual to your specific needs, or
provides hints on how to effectively use the capabilities of the product.
Safety
Before turning on the instrument, verify that the correct safety precautions have been
taken (see the following warnings). In addition, note the external markings on the
instrument, which are described under "Safety Symbols."
Warnings
WARNING
General Warnings
•
Carefully read the instructions contained in this instruction manual prior to
turning on the instrument.
•
Keep this instruction manual in a safe place for further reference.
•
Follow the installation and operation procedures.
•
It is imperative to respect the safety warnings on the instrument and in this
instruction manual.
•
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment could be impaired.
•
Do not install substitute parts or perform any unauthorized modification to the
instrument.
•
Service instructions, when applicable, are for trained service personnel. To avoid
the risk of electric shock, do not perform any work on the instrument unless
qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.
•
Do not touch the connectors directly by hand. Otherwise, a malfunction or electric
shock may result.
Important Information — Please Read Before Use
DMTA-10004-01EN, Rev. D, November 2016
9
Advertisement
Chapters
Table of Contents
Troubleshooting
