Performing File Operations - Olympus 38DL PLUS User Manual

Table 19 File data mode stored measurements (continued)
File data mode
SOFT CONTACT
% TOTAL THK
You can set the default file data mode to the option you use most frequently.
To change the default file data mode
1. From the measurement screen, press [SETUP MENU].
2. In the menu, select SYSTEM.
3. In the SYSTEM screen, set DEFAULT FILE DATA MODE to the desired option
(see Table 19 on page 182 for details).
4. Press [MEAS] to return to the measurement screen.

11.3 Performing File Operations

Pressing [FILE] opens a menu from which you can perform numerous file operations
(see Figure 11-15 on page 184). The following sections describe how to perform the
operations. Datalogger files are stored in the internal microSD memory card. You can
import/export files from/to an external microSD memory card.
Stored measurements
Sagittal height
Radius of curvature
Lenses thickness
Thickness
Percent total thickness
DMTA-10004-01EN, Rev. D, November 2016
When to use
When using the multilayer
software option (see "Using the
Multi-Measurement with the Soft
Contact Mode" on page 102)
When using the multilayer
software option (see "Using the
Multi-Measurement % Total
Thickness Mode" on page 104)
Using the Datalogger 183