IMPORTANT
If you forget the password, you can unlock the instrument and deactivate the
password by entering the master password "OLY38DLP".
When you want to change the password, you must first use the master password to
deactivate the password, and then set a new password.
4.
Select SET to set the password and return to the measurement screen.
To lock and unlock instrument functions
1.
From the measurement screen, press [SETUP MENU].
2.
In the menu, select INSTRUMENT LOCK.
3.
In the INSTRUMENT LOCK screen (see Figure 8-9 on page 125):
a) If a password was set, enter the password in PASSWORD.
b) Set the functions you want to lock to ON and the ones you want to unlock to
OFF.
c)
Select SET to activate the instrument lock and return to the measurement
screen.
Figure 8‑9 The INSTRUMENT LOCK screen
DMTA-10004-01EN, Rev. D, November 2016
Using Special Functions
125