2-D Grid Data File Type; Figure 11-6 Configuring The Id Range For A Sequential With Custom Points Data File Type - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Figure 11‑6 Configuring the ID range for a sequential with custom points data file
11.2.1.4

2-D Grid Data File Type

A grid is a sequence of ID numbers arranged to describe a path through a two-
dimensional. Each part of the ID number corresponds to a particular matrix
dimension.
A 2-D (two-dimensional) sequence begins with the ID number that refers to the first
column and the first row (see Figure 11-7 on page 171). Then the column (or row)
increments one value at a time until the sequence reaches the last column (or row)
value while the other dimension value stays constant. At this point, the other
dimension increments from its first to its last value. This continues until the ID
number that refers to the last column and the last row is reached. You can select to
first increment either the columns or the rows.
170 Chapter 11
type