Initial Setup; Setting The User Interface Language And Other System Options - Olympus 38DL PLUS User Manual

4. Initial Setup

The following sections describe basic system configurations.
4.1

Setting the User Interface Language and Other System Options

You can configure the 38DL PLUS to present the user interface in the following
languages: English, German, French, Spanish, Japanese, Chinese, Russian, Swedish,
Italian, Norwegian, Portuguese, Czech, and a customized interface. You can also set
the character delimiting the radix of a number.
The 38DL PLUS includes a beep tone generator to confirm when a key is pressed and
to notify you of an alarm condition. You can set the beeper on or off.
To save battery while you do not use the instrument, you can enable the inactive time
function so that the instrument automatically turns off when no key has been pressed
and no measurement has been made within about six minutes.
To change the user interface language and other system options
1. Press [SETUP MENU].
2. In the menu, select SYSTEM.
3. In the SYSTEM screen (see Figure 4-1 on page 50):
a) Set BEEPER to ON or OFF.
b) Set INACTIVE TIME to ON or OFF.
c) Set LANGUAGE to the desired language.
d) Set RADIX TYPE to the desired character (period or comma) to separate the
integer and the decimal digits.
DMTA-10004-01EN, Rev. D, November 2016
Initial Setup 49