Figure 11-30 The File Summary Report Screen - Olympus 38DL PLUS User Manual

Minimum Review
Allows you to select a file and then review all minimum thickness locations in the
file. You can verify the thickness at all minimum location and replace them if
needed.
To generate a report
1. From the measurement screen, press [FILE].
2. In the menu, select REPORT.
3. In the submenu, select the desired type of report. When you select:
— FILE SUMMARY, go to step 4
— MIN/MAX SUMMARY, go to step 5
— FILE COMPARISON, go to step 6
— ALARM SUMMARY, go to step 7
— MIN REVIEW, go to step 8
4. In the FILE SUMMARY screen (see Figure 11-30 on page 203):
a) Select the file for which you want to create the report.
b) Select REPORT.
The FILE SUMMARY report result screen opens (see Figure 11-31 on
page 204).
Figure 11‑30 The FILE SUMMARY report screen
DMTA-10004-01EN, Rev. D, November 2016
Using the Datalogger 203