Figure 11-9 Different Named Grid For Each Part - Olympus 38DL PLUS User Manual

To create a 2-D grid data file
1. From the measurement screen, press [FILE], and then select CREATE in the menu
(see "Creating a Data File" on page 163 for details on the first parameters).
2. At the bottom of the CREATE screen, select CONTINUE.
3. In the second page of the CREATE screen (see Figure 11-10 on page 174):
a) Enter the START COLUMN, END COLUMN, START ROW, and END ROW
values.
Figure 11‑9 Different named grid for each part
DMTA-10004-01EN, Rev. D, November 2016
Name: Elbow
Rows: 01 through 10
Columns: A through E
ID's: Elbow/A0 through
Elbow/E10
Name: Tee
Rows: 1 through 4
Columns: 1 through 3
ID's: Tee/11 through Tee/34
Using the Datalogger 173