DMTA-10004-01EN, Rev. D, November 2016
To assess the software diagnostic
1.
Press [2nd F], [SETUP MENU] (SP MENU).
2.
In the menu, select SW DIAG.
The SW DIAG screen appears, showing the log of errors (see Figure 15-4 on
page 270).
3.
Press [MEAS] to return to the measurement screen.
15.7 Viewing the Instrument Status
The STATUS screen lists important information about the instrument. The status
screen shows the following information:
•
Current instrument internal temperature
•
Current battery charge level
•
Instrument model
•
Software release date (build date)
•
Software version
•
Hardware version
•
Options code (S/N) to be communicated to Olympus for software option
activation
270
Chapter 15
Figure 15‑4 Example of the SW DIAG screen