11. Using the Datalogger
This chapter describes how to use the 38DL PLUS internal datalogger to organize
your data.
11.1 Datalogger
The 38DL PLUS datalogger is a file-based system where one file is opened at a time.
The active file stores a measurement at a thickness measurement location ID. Each
time you press [SAVE/SEND], the displayed value is saved to the active file at the
current ID. The ID is automatically incremented for the next measurement. When you
press [FILE], the name of the active file appears in the ID bar above the menu (see
Figure 11-1 on page 159).
Figure 11‑1 The active file name appearing in the ID bar
DMTA-10004-01EN, Rev. D, November 2016
Name of the active file
Using the Datalogger
159