Making Avg/Min Measurements; Figure 10-16 Opening The Avg/Min Measure Dialog Box - Olympus 38DL PLUS User Manual

DMTA-10004-01EN, Rev. D, November 2016
Figure 10‑16 Opening the Avg/Min measure dialog box
4. Press [MEAS] to return to measurement screen.

10.6 Making AVG/MIN Measurements

When you are in the measurement screen and the AVG/MIN measurement is active,
the last measured thickness values (up to four) appear above the current thickness
value together with the average or minimum value (see Figure 10-17 on page 155).
154 Chapter 10