Sensor Module Cabinet-Mounted Smc30; Description; Safety Instructions For Sensor Modules Cabinet-Mounted - Siemens SINAMICS S110 Manual

Supplementary system components and encoder system integration

8.4 Sensor Module Cabinet-Mounted SMC30

8.4 Sensor Module Cabinet-Mounted SMC30
8.4.1

Description

The Sensor Module Cabinet-Mounted SMC30 is an expansion module for snapping on to a
standard mounting rail acc. to EN 60715. It evaluates encoder signals and transmits the
speed, actual position, and, if applicable, the motor temperature and reference point via
DRIVE-CLiQ to the Control Unit.
The SMC30 is used to evaluate encoder signals from encoders with TTL, HTL, or SSI
interfaces.
A combination of TTL/HTL signal and SSI absolute signal is possible at terminals
X521/X531, if both signals are derived from the same measured variable.
8.4.2

Safety instructions for Sensor Modules Cabinet-Mounted

Danger to life if the fundamental safety instructions and residual risks are not heeded
Failure to heed the fundamental safety instructions and residual risks in Chapter 1
(Page 17) can result in accidents causing severe injuries or death.
• Follow the fundamental safety instructions.
• Consider the residual risks on the risk assessment.
Danger to life due to failure to heed the specific safety instructions for Sensor Modules
Failure to heed the Specific safety instructions for Sensor Modules (Page 170) can result in
accidents causing severe injuries or death.
• Heed the Specific safety instructions for Sensor Modules.
190
WARNING
WARNING
SINAMICS S110
Manual, 07/2015, 6SL3097-4AC10-0BP5