Downloading G250 Firmware Files To A Local Tftp Server - Avaya G250 Installation And Upgrade Manual

Upgrading the G250 firmware
9. Enable the TFTP server as follows:
- From the System menu, select Setup. The server option window appears.
- Select the Outbound tab, and enter the directory location of the TFTP server for the
outbound file path.
- Select the Options tab, and enter 69 in the Use Port field (default).
- Select No Incoming (default). However, if you wish to copy files as a backup prior to
performing a software upgrade, leave this field unselected.
- Select the Inbound tab, and enter the directory path of the TFTP server for the inbound
file path.
- Click OK.

Downloading G250 firmware files to a local TFTP server

This section describes how to download the individual firmware files from the Avaya website to
a TFTP server on the local network with the G250.
If you are upgrading
Note:
If you are performing the upgrade using the G250's Command Line Interface
Note:
(CLI) or the Upgrade Tool, you can place the upgrade files on an FTP server.
However, the GIW requires that the files be placed on a TFTP server.
To download firmware files from the Avaya Web site to a TFTP directory:
1. Access the
2. Navigate to the G250 Media Gateway Downloads section:
A list of firmware files appears.
3. Locate the file names that match the files listed in your installation worksheet. See
Table 6: Sample Software and Firmware Filenames
names.
4. Double-click the file name of the file you want to download. A File Download window
appears.
5. Select Save this file to disk.
6. Save the file to directory on the TFTP server on the local LAN that was created for this
purpose. See
88 Installation and Upgrade for the Avaya G250 Media Gateway
www.avaya.com/support
Setting up a TFTP server
Web site.
on page 89 for sample firmware file
on page 87.