IDEC MICROSmart FC6A Series Ladder Programming Manual page 77

■ D8639 to D8642: CPU Module Ethernet Port 2 Default Gateway (Write-only)
These registers are used to write the default gateway of Ethernet port 2 on the Plus CPU module.
Default gateway: For aaa.bbb.ccc.ddd, write the following.
D8639 = aaa, D8640 = bbb, D8641 = ccc, D8642 = ddd
■ D8643 to D8646: CPU Module Ethernet Port 2 Preferred DNS Server (Write-only)
These registers are used to write the preferred DNS server of Ethernet port 2 on the Plus CPU module.
Preferred DNS server: For aaa.bbb.ccc.ddd, write the following.
D8643 = aaa, D8644 = bbb, D8645 = ccc, D8646 = ddd
■ D8647 to D8650: CPU Module Ethernet Port 2 Alternate DNS Server (Write-only)
These registers are used to write the alternate DNS server of Ethernet port 2 on the Plus CPU module.
Alternate DNS server: For aaa.bbb.ccc.ddd, write the following.
D8647 = aaa, D8648 = bbb, D8649 = ccc, D8650 = ddd
■ D8651 to D8656: CPU Module Ethernet Port 2 MAC Address (Current Value Read-only)
The MAC address of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: MAC address: AA-BB-CC-DD-EE-FF
D8651 = AA, D8652 = BB, D8653 = CC, D8654 = DD, D8655 = EE, D8656 = FF
■ D8657 to D8660: CPU Module Ethernet Port 2 IP Address (Current Value Read-only)
The IP address of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: The CPU module's own IP address: aaa.bbb.ccc.ddd
D8657 = aaa, D8658 = bbb, D8659 = ccc, D8660 = ddd
■ D8661 to D8664: CPU Module Ethernet Port 2 Subnet Mask (Current Value Read-only)
The subnet mask value of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: Subnet mask: aaa.bbb.ccc.ddd
D8661 = aaa, D8662 = bbb, D8663 = ccc, D8664 = ddd
■ D8665 to D8668: CPU Module Ethernet Port 2 Default Gateway (Current Value Read-only)
The default gateway address of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: Default gateway: aaa.bbb.ccc.ddd
D8665 = aaa, D8666 = bbb, D8667 = ccc, D8668 = ddd
■ D8669 to D8672: CPU Module Ethernet Port 2 Preferred DNS Server (Current Value Read-only)
The preferred DNS server address of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: Preferred DNS server: aaa.bbb.ccc.ddd
D8669 = aaa, D8670 = bbb, D8671 = ccc, D8672 = ddd
■ D8673 to D8676: CPU Module Ethernet Port 2 Alternate DNS Server (Current Value Read-only)
The alternate DNS server address of Ethernet port 2 on the Plus CPU module is written to the special data registers as follows.
Example: Alternate DNS server: aaa.bbb.ccc.ddd
D8673 = aaa, D8674 = bbb, D8675 = ccc, D8676 = ddd
■ D8759: EMAIL Instruction Detailed Error Information (Ethernet Port 1)
Detailed error information for the EMAIL instruction (Ethernet port 1) is written to this register.
For details, see Chapter 12 "Confirm the error detail of EMAIL instruction" in the "FC6A Series MICROSmart Communication
Manual".
■ D8782: BACnet Operation Status
The operating status of BACnet communication is written to this special data register.
For details, see Chapter 15 "Special Devices Used in BACnet/IP" in the "FC6A Series MICROSmart Communication Manual".
■ D8783: BACnet Error Information
Information for the error that last occurred in BACnet communication is written to this special data register.
For details, see Chapter 15 "Special Devices Used in BACnet/IP in the "FC6A Series MICROSmart Communication Manual".
FC6A S MICROS L
ERIES MART
P M
ADDER ROGRAMMING ANUAL
FC9Y-B1726
2: D
EVICES
2-45