IDEC MICROSmart FC6A Series Ladder Programming Manual page 343

Settings
■ Devices tab
1.
7.
1. Select instruction
This item selects which ARAMP instruction to use ("ARAMP1", "ARAMP2", "ARAMP3" or "ARAMP4").
The output, reversible control mode, and operation mode that can be selected differ by the instruction and CPU module type.
For limitations based on the combination of instruction, reversible control mode, and the pulse output mode, see "8. Reversible
control enable" on page 18-52.
2. 3.
FC6A S MICROS
ERIES MART
4. 5.
L P M
ADDER ROGRAMMING ANUAL
18: P O
ULSE UTPUT
6.
FC9Y-B1726
I
NSTRUCTIONS
18-47