IDEC MICROSmart FC6A Series Ladder Programming Manual page 483

Settings
2.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Notes:
• The Options tab is displayed only with the Plus CPU module.
• Items 12. to 18. can be set only in advanced mode.
• Items 19. to 26. can be set in basic and advanced modes.
1. S1 (source 1): Folder Name
Specify the folder name on the SD memory card to store the log data with a desired text up to 8 single-byte alphanumeric characters.
Notes:
• The following single-byte characters cannot be used in the folder names:
/ \ : * ? " < > | # { } % & ~
• Consecutive periods cannot be used in folder names.
• A period cannot be used at the start or the end of the folder name.
• Single-byte spaces at the start or the end of the folder name are omitted.
2. D1 (destination 1): Completion Output
Specify the device that turns on when the transfer of log data to a SD card and the execution of the DLOG instruction are
complete. This device is turned on regardless of the success or failure of transferring log data to the SD memory card.
3.
4.
9.
10.
FC6A S MICROS L
ERIES MART
1.
5. 6.
P M
ADDER ROGRAMMING ANUAL
25: D L
ATA OG
7.
8.
FC9Y-B1726
I
NSTRUCTIONS
25-3