IDEC MICROSmart FC6A Series Ladder Programming Manual page 61

■ D8022 to D8025: Scan Time Data
D8022 through D8025 are special data registers for checking the scan time and configuring the constant scan time. For details
on the scan time, see Chapter 5 "Constant Scan Time" in the "FC6A Series MICROSmart User's Manual".
■ D8026: Communication Mode Information (Port 1 to 3)
This register indicates communication mode information for Port 1 to Port 3.
The allocation of communication ports in the device (bit assignment) is as follows.
Bit Bit
15 11
0 (0000): Maintenance communication
1 (0001): User communication
2 (0010): Modbus RTU master
3 (0011): Modbus RTU slave
4 (0100): Data link communication
■ D8029: System Software Version
The CPU module system software version number is written to this register.
■ D8030: Communication Cartridge Information
This register indicates information about the communication cartridges in Port 2 and Port 3.
The allocation of communication ports in the device (bit assignment) is as follows.
Bit
15
0 (00): No communication cartridges
1 (01): RS-232C communication cartridge
2 (10): RS-485 communication cartridge
3 (11): Bluetooth communication cartridge
■ D8031: Optional Device Connection Information
Optional device connection information is written to this register.
The allocation of bits in the device (bit assignment) is as follows.
Bit
15
0: No optional device
1: Optional device is connected
■ D8032 to D8035, D8214, D8215: Interrupt Input Jump Destination Label No.
Jump destination label numbers for interrupt inputs are written to these registers. When using interrupt inputs, write the label
number that corresponds to the special data register that has been allocated to the interrupt input. For details on interrupt
inputs, see Chapter 5 "Interrupt Input" in the "FC6A Series MICROSmart User's Manual".
D8032 = I1
D8033 = I3
D8034 = I4
D8035 = I6
D8214 = I7
D8215 = I0
■ D8036: Timer Interrupt Jump Destination Label No.
The jump destination label number when the timer interrupt occurs is written to this register. When using the timer interrupt,
store the corresponding label number.
For details on the timer interrupt, see Chapter 5 "Timer Interrupt" in the "FC6A Series MICROSmart User's Manual".
Bit Bit Bit Bit
8 7 4 3
Bit Bit Bit Bit Bit
8 7 5 4 3
Bit Bit
8 7 3
FC6A S MICROS L
ERIES MART
Bit
0
Port 1
Port 2
Port 3
Bit Bit Bit
2 1 0
Cartridge Slot 1
Cartridge Slot 2
Cartridge Slot 3
Bit
2 1 0
Reserved=0
SD Memory Card
Cartridge Slot 1
Cartridge Slot 2
Cartridge Slot 3
P M
ADDER ROGRAMMING ANUAL
FC9Y-B1726
2: D
EVICES
2-29