IDEC MICROSmart FC6A Series Ladder Programming Manual page 217

11: W
EEK
This chapter describes the week programmer instructions that are used to turn outputs on and off on the specified days of the
week or dates and times.
WKTIM (Week Timer)
Compares the specified day of the week, start time, and end time with the current time and outputs that result.
WKTIM S1
＊ ＊ ＊ ＊ ＊
Note: The WKTIM instruction is compatible with the FC5A Series MICROSmart WKTIM instruction. For details on the WKTIM instruction, see
Chapter 9 "WKTIM (Week Timer)" in the "FC5A Series MICROSmart Pentra User's Manual Advanced Volume".
WKTBL (Week Table)
Sets the specified month and day as a special date.
WKTBL
Note: The WKTBL instruction is compatible with the FC5A Series MICROSmart WKTBL instruction. For details on the WKTBL instruction, see
Chapter 9 "WKTBL (Week Table)" in the "FC5A Series MICROSmart Pentra User's Manual Advanced Volume".
WEEK (Weekly Timer)
Compares the specified day of the week, ON time, and OFF time with the current time and outputs that result.
WEEK S1
*****
Note: For details on the WEEK instruction, see "WEEK (Weekly Timer)" on page 11-3.
YEAR (Yearly Timer)
Compares the specified date with the current date and outputs that result. This allows the special dates within a one-year period
to be specified.
YEAR S1
＊ ＊ ＊ ＊ ＊
Note: For details on the YEAR instruction, see "YEAR (Yearly Timer)" on page 11-16.
P
ROGRAMMER
S2 S3 D1
＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊
S1 ・ ・ ・ Sn
＊ ＊ ＊ ＊ ＊ ・ ・ ・ ＊ ＊ ＊ ＊ ＊
S2 S3 D1
***** ***** *****
S2 S3 D1
＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊ ＊
FC6A S MICROS
ERIES MART
I
NSTRUCTIONS
L P M
ADDER ROGRAMMING ANUAL
FC9Y-B1726 11-1