IDEC MICROSmart FC6A Series Ladder Programming Manual page 238

11: W P
EEK ROGRAMMER
4. S3 (source 3): The number of parameter tabs
This setting configures the number of parameter tabs.
This setting is shared in common with "To configure the dates as a fixed setting". See "4. S3 (source 3): Number of parameter
tabs" on page 11-17.
5. D1 (destination 1): Output
This setting configures the output for the results when the configured dates and the current date are compared.
This setting is shared in common with "To configure the dates as a fixed setting". See "5. D1 (destination 1): Output" on page
11-18.
6. Pulse Output
This setting configures the operation for D1 (output). This setting is applied to all parameter tabs.
This setting is shared in common with "To configure the dates as a fixed setting". See "6. Pulse Output" on page 11-18.
7. Data Register Allocation
Click this button to display the Device Allocation dialog box. As shown below, a table of the data registers and their
corresponding YEAR instruction settings is displayed on the dialog box (8). Click Allocate Comments (9) and you can
configure the comments for the data registers that correspond to the names of the settings.
This button is only used when indirectly specifying the settings for the YEAR instruction with data registers.
• Device Allocation dialog box
9.
• Parameter tab
This tab configures the settings for the output. A maximum of 20 parameter tabs can be configured for 1 YEAR instruction.
If indirectly specifying the settings for the YEAR instruction with data registers, the settings configured on the parameter tabs are
stored in the data registers when the initialization input is turned on.
This setting is shared in common with "To configure the dates as a fixed setting". See "Parameter tab" on page 11-18.
• Preview
The preview shows the ON/OFF state for the output based on the settings configured on the parameter tabs in a calendar.
This function is shared in common with "To configure the dates as a fixed setting". See "Preview" on page 11-20.
11-22
I
NSTRUCTIONS
8.
FC6A S MICROS
ERIES MART
L P M
ADDER ROGRAMMING ANUAL
FC9Y-B1726