IDEC MICROSmart FC6A Series Ladder Programming Manual page 580

28: U - M
SER DEFINED
User-defined macro registration procedure
This section describes the procedure to create and register a user-defined macro.
A registered user-defined macro can be set and executed with the UMACRO instruction.
Right-click User-defined Macro in the Project window and click New.
1.
The Argument settings dialog box will be displayed.
Configure the user-defined macro.
2.
• Set the user-defined macro number with No. (1).
• Enter the name of the user-defined macro number in Name (2).
• Select the number of arguments to use in the user-defined macro in Number of arguments (3).
• Select the device type of the arguments with Device Type (4).
(2)
(1)
You can prevent the settings in the Argument settings dialog box from being changed by selecting the Protect User-
Note:
defined Macro ladder program check box and setting a password.
Click OK to close the Argument settings dialog box.
3.
The Editor will be displayed to create a ladder program in the user-defined macro.
28-6
I
ACRO NSTRUCTION
(3)
(4)
FC6A S MICROS
ERIES
L P
MART ADDER ROGRAMMING
M FC9Y-B1726
ANUAL