IDEC MICROSmart FC6A Series Ladder Programming Manual page 226

11: W P
EEK ROGRAMMER
Timing Chart when the Input Turns On during the Configured Interval
When the input turns on or off during the interval between the ON settings and the OFF settings, and when the input is turns on
or off after 0:00 on the date configured by the ON settings while pulse output is enabled, the timing chart is as follows.
■ When pulse output is disabled
Setting details
ON
Monday 13:00
Settings
OFF
Wednesday 18:00
Settings
Output Q0
[When the input is on before the day of the week and time specified by the ON settings]
On Monday at 0:00 when input M0000 is turned on, the result of the current date compared with the ON and OFF settings is not
within the ON and OFF settings (Monday 13:00 to Wednesday 18:00). Therefore, the output remains off.
Afterward, on Monday at 13:00, output Q0 turns on, and it turns off on Wednesday at 18:00.
Day of the week
Time
ON
Input M0000
OFF
ON
Output Q0
OFF
[When the input is turned on or off during the interval between the ON and OFF settings]
On Tuesday at 6:00 when input M0000 is turned on, the result of the current date compared with the ON and OFF settings is
within the ON and OFF settings (Monday 13:00 to Wednesday 18:00). Therefore, the output turns on. Afterward, if input M0000
is turned off before the OFF settings, the output also turns off at the same time.
Day of the week
Time
ON
Input M0000
OFF
ON
Output Q0
OFF
11-10
I
NSTRUCTIONS
Sunday Monday
0:00 13:00
ON settings Day of the week : Monday
Time : 13:00
Sunday Monday
13:00
ON settings Day of the week : Monday
Time : 13:00
FC6A S MICROS
ERIES MART
WEEK S1 S2
M0000
Tuesday Wednesday
18:00
OFF settings Day of the week : Wednesday
Time : 18:00
Tuesday Wednesday
6:00 15:00 18:00
OFF settings Day of the week : Wednesday
Time : 18:00
L P M
ADDER ROGRAMMING ANUAL
S3 D1
1 Q0000
Thursday Friday
Thursday Friday
FC9Y-B1726
Saturday
Saturday