IDEC MICROSmart FC6A Series Ladder Programming Manual page 439

Use the Module Configuration Editor to configure the analog input for the analog I/O cartridge.
6.
On the Configuration tab, in the PLCs group, select Expansion Modules.
7. Select FC6A-PJ2CP in the expansion modules and cartridges list and drag and drop it to the module configuration area.
Click the FC6A-PJ2CP analog I/O cartridge that was interested in the module configuration area and click Configure.
8.
The Analog Parameters Configuration (Cartridge Slot 1) dialog box is displayed.
Configure the items.
9.
• For channel IN0 : AI2 Data Type, select Celsius (°C) (1).
10. Click OK to close the Analog Parameters Configuration (Cartridge Slot 1) dialog box.
1.
FC6A S MICROS L
ERIES MART
P M
ADDER ROGRAMMING ANUAL
19: PID C
ONTROL
FC9Y-B1726
I
NSTRUCTION
19-49