IDEC MICROSmart FC6A Series Ladder Programming Manual page 220

11: W P
EEK ROGRAMMER
Settings
There are two methods to configure the day of the week and the time for the WEEK instruction. Specify the method on the
Devices tab with Data register settings.
• Configuring the day of the week and the time as fixed settings
The day of the week and the time for the ON/OFF settings are uniquely determined. The day of the week and the time for
the ON/OFF settings cannot be changed while the FC6A Series MICROSmart is running. For details, see "To configure the
day of the week and the time as fixed settings" on page 11-4.
• Configuring the day of the week and the time by specifying data registers
The day of the week and the time for the ON/OFF settings are configured according to the values stored in the specified data
registers. The day of the week and the time for the ON/OFF settings can be changed while the FC6A Series MICROSmart is
running. For details, see "To configure the days of the week and the time by specifying data registers" on page 11-7.
To configure the day of the week and the time as fixed settings
The day of the week and the time for the ON/OFF settings are uniquely determined. The day of the week and the time for
the ON/OFF settings cannot be changed while the FC6A Series MICROSmart is running.
• Devices tab
1.
2.
6.
1. Data register settings
This setting determines whether to configure the day of the week and the time as fixed settings or to indirectly specify them
with data registers.
To configure the day of the week and the time as fixed settings, clear this check box.
Unselected check box
The day of the week and the time are fixed settings. The day of the week and the time are configured on the parameter
tabs. The day of the week and the time cannot be changed while the FC6A Series MICROSmart is running. For the settings,
see "Parameter tab" on page 11-5.
Note: When this check box is selected, the settings for the day of the week and the time are indirectly specified with data registers.
Configure the day of the week and the time by using data registers. The day of the week and the time can be changed while the FC6A Series
MICROSmart is running. For directions specific to data registers, see "To configure the days of the week and the time by specifying data
registers" on page 11-7.
2. S1 (source 1): First Data Register
This setting is not configured when configuring the day of the week and the time as fixed settings.
3. S2 (source 2): Initialization Input
This setting is not configured when configuring the day of the week and the time as fixed settings.
4. S3 (source 3): Number of parameter tabs
This setting configures the number of parameter tabs. When this value is increased or decreased, the number of parameter tabs
displayed on the dialog box increases or decreases. 6 bytes of the user program region are used for each parameter tab.
For the settings, see "Parameter tab" on page 11-5.
11-4
I
NSTRUCTIONS
3. 5.
4.
FC6A S MICROS
ERIES MART
L P M
ADDER ROGRAMMING ANUAL
FC9Y-B1726