IDEC MICROSmart FC6A Series Ladder Programming Manual page 126

Automation organizer windldr

Hide thumbs Also See for MICROSmart FC6A Series:

Table of Contents

Multiple Usage of MCS instructions

Ladder Diagram

This master control circuit will give priority to I1, I3, and I5, in that order.

When input I1 is off, the first MCS is executed so that subsequent inputs I2 through I6 are forced off.

When input I1 is on, the first MCS is not executed so that the following program is executed according to the actual input statuses

of I2 through I6.

When I1 is on and I3 is off, the second MCS is executed so that subsequent inputs I4 through I6 are forced off.

When both I1 and I3 are on, the first and second MCSs are not executed so that the following program is executed according to

the actual input statuses of I4 through I6.

Counter and Shift Register in Master Control Circuit

Ladder Diagram

Program List

When input I1 is on, the MCS is not executed so that the counter and shift register are executed according

to the actual status of subsequent inputs I2 through I4.

When input I1 is off, the MCS is executed so that subsequent inputs I2 through I4 are forced off.

When input I1 is turned on while input I2 is on, the counter and shift register pulse inputs are turned on as

shown below.

Timing Chart

Counter Pulse Input

Shift Register Pulse Input

Show Quick Links

Table of Contents