Installing The New System Fan; Concluding Steps - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

8.3.3

Installing the new system fan

Ê Insert the system fan into the air duct.
Figure 74: Installing the system fan in the air duct
Ê Push the system fan on the snap rivets (1).
I
Notice the position of the fan cable. Ensure that the fan cable is not
pressed.
Ê Insert and tightly push the four safety pins into the snap rivets (2).
Ê Insert the fan cable in the guidings (see figure 71).
8.3.4

Concluding steps

"Installing the fan module" on page 152
Ê
"Reassembling" on page 58
Ê
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
"Performing a fan test after replacing a defective fan" on page 96
Ê
TX1330 M1
Upgrade and Maintenance Manual
System fan and air duct
157