CSS components
8.2.5
Reinstalling the fans and closing the server
8.2.5.1
Installing system fan 1 (and 3)
Figure 34: Installing system fan 1 (and 3)
Ê Place the hooks of system fan 1 (and 3) into the recesses on the rear of the
server (1).
Ê Push system fan 1 (and 3) in the direction of the arrow until the locking lever
engages (2).
Ê Connect the fan cable to the connector FAN1 (if there is a second fan cable,
connect this in FAN3) on the system board (see the technical manual for the
system board D2709 on the PRIMERGY ServerView Suite DVD 2).
TX200 S5
Replacement of non-hot-plug components
Operating Manual
105