Accessible drives and LSD
12.6.1.3 Installing the 4x 3.5-inch HDD extension box
Ê Install the 4x 3.5-inch HDD extension box into installation bays 1, 2 and 3 as
described in section
12.6.1.4 Cabling the slimline ODD
Ê Connect the SATA and power cables (see section
Figure 239: Routing cables
Ê Run the SATA cable along the drive bays and through the cable clamps on
the server floor as shown.
Ê Run the SATA cable through the cable guide.
12.6.1.5 Concluding steps
"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
322
"Installing an HDD extension box" on page
Upgrade and Maintenance Manual
179.
"Cabling" on page
TX2540 M1
389).