Hard disk drive (HDD) / solid state drive (SSD)
7.5.2
Installing the 8x 2.5-inch HDD/SSD extension box
Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
7.5.2.1
Preliminary steps
"Suspending BitLocker functionality" on page 105
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
Ê Remove the fan bridge, see section
7.5.2.2
Removing accessible drive dummy covers
Ê Remove accessible drive filler covers from the required bays, see section
"Accessible drive filler covers" on page
Ê Remove the accessible drive covers, see section
on page
100.
7.5.2.3
Installing the HDD/SSD backplane
Ê If applicable, install the HDD/SSD backplane on the 8x 2.5-inch HDD/SSD
extension box, see section
page
250.
242
"Handling fan bridges" on page
"Installing the new HDD/SSD backplane" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
98.
"Accessible drive covers"
90.
TX2550 M4