Using The Chassis Id Prom Tool; Configuring Lan Teaming - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

▶ Depending on the model type of network controllers in your system, you will
find one or several menu items which are created by UEFI driver of the
network controllers. Each menu item of UEFI driver will display detailed
information on the related network controller, including its MAC address.
▶ Note down the new 12-digit MAC address.
▶ Press [Esc] to exit the BIOS.
▶ Inform the customer about the changed MAC address.
5.2.10

Using the Chassis ID Prom Tool

The Chassis ID EPROM located on a dedicated Chassis ID board or on the
front panel board of your server contains system information like server name
and model, housing type, serial number and manufacturing data.
In order to integrate your system into the ServerView management
environment and to enable server installation using the ServerView Installation
Manager, system data needs to be complete and correct.
After replacing the Chassis ID EPROM, system information has to be entered
using the Chassis ID Prom tool. The tool and further instructions are available
to maintenance personnel from the Fujitsu web pages:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
▶ Select your PRIMERGY system from the main area of the page.
▶ From the categories selection, choose Software & Tools Documentation.
▶ In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
For Japan:
Follow the instructions provided separately.
5.2.11

Configuring LAN teaming

After replacing or upgrading LAN controllers
You need to restore the configuration for the LAN Teaming, using the LAN
driver utility or OS teaming software.
TX1310 M5 Upgrade and Maintenance Manual
Basic software procedures
71