Penhead Ffc (Flexible Flat Cable) - MUTOH Kona 760 Service Manual

3.4.2

Penhead FFC (flexible flat cable)

Tools necessary
P2 screwdriver

Snap-off blade

Replacement procedure
Follow the procedure below to replace the penhead FFC.
Remove the following covers first:
Step 1:



Remove the 2 screws of the flatcable bracket.
Step 2:
Disconnect the flatcable.
Step 3:
AP-74380 - Revision 1.1
Right cover
Refer to Cover removal > Side covers on page 28
Y-rail cover
Refer to Cover removal > Y-rail cover on page 29
Penhead cover
Refer to Cover removal > Penhead cover on page 30
Service manual Kona cutting plotter
Part replacement
3
41