Rear Platen - MUTOH Kona 760 Service Manual

Service manual Kona cutting plotter
Part replacement
3.1.5

Rear platen

Tools necessary
P2 screwdriver

Removal procedure
Step 1:
Step 2:
Step 3:
Step 4:
32
Remove the following covers first:
Side covers

Refer to Cover removal > Side covers on page 28
Y-rail cover

Refer to Cover removal > Y-rail cover on page 29
Remove the 3 screws fixing the rear platen.
3x
Lower the pressure rollers.
Remove the rear platen.
AP-74380 - Revision 1.1