MUTOH Kona 760 Service Manual page 118

Service manual Kona cutting plotter
Diagnostics mode
Step 5:
Step 6:
Note
The cutting or sheeting-off routine can be aborted at anytime. However, the

cutter will finalize the current iteration first.
118
Velocity

Acceleration

Force

Tool Up or Down

Start the aging test using the settings and pattern displayed

After making the settings and pressing the play button, the cutter will cut the set
amount of test patterns.
A count up (in case of infinite iterations) or count down (in case of specific amount of
iterations) screen will be displayed.
AP-74380 - Revision 1.1