Restore Parameters Of Machine - MUTOH Kona 760 Service Manual

4.3.2

Restore parameters of machine

Be sure that:
Step 1:



Right-click on the opened connection and choose to restore backup to a machine...
Step 2:
An overview of the available files will be displayed.
Step 3:


The settings will be restored and the machine will reboot automatically. This may
Step 4:
take a few minutes.
Check the settings and confirm if the restore has been finalised successfully.
Step 5:
AP-74380 - Revision 1.1
the cutter is powered ON and connected to the PC via USB
the USB drivers are installed.
the Mutoh CutServer has been launched and a connection has been established
Double click on the back-up you want to be installed.
Double click on the COM port to which the cutter is connected.
Service manual Kona cutting plotter
Adjustments and calibrations
4
99