Service manual Kona cutting plotter
Adjustments and calibrations
4.2.3
How to uninstall the USB drivers
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
96
Make sure your Kona is powered ON and connected to the PC.
In the Device manager you will find your device
Virtual serial port
USB device
Uninstall the serial PORT
Double-click on the USB serial port item and select the driver TAB
When you want to install a new version of the driver press the update driver
button.
When you want to remove the complete driver press on the uninstall button.
Perform the same actions to uninstall/update the USB device
When the driver is uninstalled successfully, the virtual serial port and the USB
device will be removed from the device manager lists.
AP-74380 - Revision 1.1