Press on the Default button
Step 2:
Choose the default you want to reset
Step 3:
Confirm by clicking yes
Step 4:
The machine will reboot and all settings will be reset.
Step 5:
5.3.5
Accuracy
In this menu it is only possible to read out the values sent by the Mutoh CutServer to the
Kona.
Refer to
Mutoh CutServer tests > XY-distance accuracy test on page 102
AP-74380 - Revision 1.1
User defaults
Machine defaults
Service manual Kona cutting plotter
Diagnostics mode
5
113