Machine Version - MUTOH Kona 760 Service Manual

Service manual Kona cutting plotter
Product overview
2.6

Machine version

Each machine has its own version number existing
out of a letter (version) and a number (revision),
e.g. A2.
Some parts integrated in a machine with a

higher version number, might not be
downwards-compatible with machines
containing a lower version number.
Example: Parts tagged with version C are NOT downwards compatible with machines

from version A and B
Some parts integrated in a machine with a higher revision number, are downwards

compatible with machines containing a lower revision number.
Parts that are different due to different version-numbers, will be tagged on the sparepart-list,
with a serial number. (refer to the table below)
When spare parts have to be ordered, please always verify the serial-number on the cutter,
with those on the sparepart-list, to ensure you use the correct part!
Serial numbers
LA-1910xx and LA-1911xx
LA-1001xx to LA-1007xx
The version label of the machine can be found behind the right side cover.
Refer to
Note
The list of differences between the versions can be requested at our service
department (service@mutoh.eu).
24
LA-1909xx
LA-1912xx
Cover removal > Side covers on page 28
Machine version number
A1
A2
A3
A4
AP-74380 - Revision 1.1