Warnings, Cautions And Notes; Compliance With The Following Regulations - MUTOH Kona 760 Service Manual

Service manual Kona cutting plotter
Regulations and safety information
1.1

Warnings, cautions and notes

Safety terms in this manual and the contents of warning labels attached to the cutter are
categorized into the following three types, depending on the degree of risk (or the scale of
accident).
Read the following explanations carefully and follow the instructions in this manual.
Safety terms
Important
Caution
Notes
1.2

Compliance with the following regulations

10
Details
Must be followed carefully to avoid death or serious bodily injury.
Must be observed to avoid bodily injury (moderate or light) or damage to
your equipment.
Contains important information and useful tips on the operation of your
cutter.
The CE marking is a mandatory European marking for certain
product groups to indicate conformity with the essential health and
safety requirements set out in European Directives.
By affixing the CE marking, the manufacturer, his authorized
representative, or the person placing the product on the market or
putting it into service ensures that the item meets all the essential
requirements of all applicable EU directives and that the applicable
conformity assessment procedures have been applied.
This product is tested and approved by the Canadian Standards
Association (CSA), this to provide increased assurance of quality and
safety.
The product is tested according to IEC60950.
This standard tries to cover all safety aspects.
Mechanical, electrical

Choice of components

Choice of materials: flammability!

Connectors, cables ...

Fire enclosure

...

This means the product is safe for users, service personnel and
production personnel.
CSA International certification is not a legal commitment but it
assures the quality and safety of the machine.
AP-74380 - Revision 1.1