Service manual Kona cutting plotter
Part replacement
Front and middle paper sensor
Follow the procedure below to replace the front and middle paper sensor.
Step 1:
Step 2:
Step 3:
Step 4:
Rear paper sensor
Follow the procedure below to replace the rear paper sensor.
Step 1:
Step 2:
Step 3:
Step 4:
82
Remove the front platen.
Refer to
Cover removal > Front platen on page 31
Disconnect the sensor cable.
Remove the screw fixing the sensor.
Replace the paper sensor.
Remove the rear platen.
Refer to
Cover removal > Rear platen on page 32
Disconnect the sensor cable.
Remove the screw fixing the sensor.
Replace the paper sensor.
AP-74380 - Revision 1.1